Kitchen plumbing that just works.
Sinks, disposals, faucets and full island relocations for Mesa kitchens, rated 4.7 stars across 21 reviews on Google.
Kitchens work harder than any other room in the house. Prestige Plumbing keeps Mesa kitchens running with disposal repairs, faucet swaps, supply line replacements and drain cleaning. When a remodel calls for moving the sink to an island, we handle the rough in, the venting and the drain so the new layout actually works.
Small kitchen problems become big ones quietly. A slow drain becomes a grease blocked line, and a drip under the sink becomes a ruined cabinet floor. We give free estimates, quote in writing before work starts, and treat a jammed disposal with the same care as a full remodel.
- Island sink relocations, rough in to finish
- Disposal repair and replacement, same visit when possible
- Faucet installs that do not leak later
- You approve the number before we touch anything
Everything under kitchen plumbing.
Island sink relocations
New drain runs, island venting and supply lines get planned before the cabinets are set.
Garbage disposal replacement
Failed units come out and a properly sized replacement goes in with fresh mounting hardware.
Kitchen faucet installation
Pull down and bridge faucets get set with new angle stops and braided supply lines.
Grease line hydro jetting
Grease builds a hard shell inside kitchen lines, and jetting strips it back to bare pipe.
Kitchen drain camera inspection
A camera shows what is actually narrowing the line so the fix matches the problem.
Dishwasher plumbing hookups
Supply, drain and air gap connections get set so the dishwasher never backs into the sink.
Under sink leak repair
We chase the drip to its source, whether that is the trap, the stop or the faucet.
Pot filler installation
A wall mounted filler needs a supply run and a shutoff placed where you can reach it.
Refrigerator water lines
Ice maker and filtered water lines get run and valved so nothing weeps behind the fridge.
Angle stop replacement
Corroded stops get swapped for quarter turn valves before the next repair needs them to close.
Problems we solve.
Island sink relocations.
Moving a sink to an island means new drain runs, venting and supply lines under the slab or floor. We do island sink relocations as part of kitchen remodels, planned so the finished island works like it was always there.
Dead or jammed disposals.
A humming disposal is usually jammed, a silent one is usually done. We free jams, replace failed units and make sure the new disposal matches how your household actually cooks.
Grease clogged kitchen drains.
Years of grease and soap narrow a kitchen line until it barely drains. Instead of guessing, we run a camera when the problem repeats and clean the line properly, hydro jetting it when buildup is heavy.
Leaking faucets and supply lines.
Drips waste water and slowly wreck the cabinet under them. We repair or replace faucets, angle stops and supply lines, and we check the whole under sink assembly while we are in there.
Low pressure at the kitchen faucet.
Hard East Valley water scales up aerators, supply lines and valves over time. We find where the pressure is dying and fix that, instead of swapping parts until something changes.
Signs it is time to call.
- Water backing up into the sink when the dishwasher runs
- Disposals that hum but will not spin
- Standing water in the cabinet under the sink
- Smells that keep coming back up the drain
- Faucet drips that return after every tightening
- Sinks that drain slower every month
How the job runs.
- 1
Diagnose first.
We start under the sink and at the fixture, checking the drain, the disposal and the supply lines before naming a fix.
- 2
Quote in writing.
You see the price and the scope on paper before we start. Estimates are free and remodel rough ins are quoted from your plan.
- 3
Make the fix.
Repairs happen the same visit whenever parts allow. Relocations and remodel work run on your project schedule, coordinated with your contractor.
- 4
Prove it works.
We run water, fill and drain the sink, cycle the disposal and check every joint dry before we pack up.
Repair the disposal or put in a new one.
Not every dead disposal is finished. A jam, a tripped reset or a worn splash guard are all small fixes. A cracked body, water under the unit or a motor that trips every week points somewhere else, and we will say so plainly.
Worth repairing when.
- The unit jams but spins free once cleared.
- Only the splash guard or mounting gasket is worn.
- The reset button holds after the jam is removed.
- The housing is dry with no rust weeping at the seam.
Worth replacing when.
- Water is dripping from the body of the unit itself.
- The motor trips the reset every few days.
- The grind chamber is rusted through at the bottom.
- The unit is undersized for how much the kitchen actually gets used.
What you get.
- The sink drains at full speed instead of gurgling and backing up.
- No more standing water quietly warping the cabinet floor.
- Your remodel island works like it was in the original plans.
- A disposal sized to how your household actually cooks lasts longer.
- One visit usually handles it, so your kitchen goes back to normal.
What moves the price.
Every quote is written down before the work starts. These are the things that change the number, so nothing on the invoice is a surprise.
- Whether the clog sits under the sink or out in the main branch.
- If the line needs hydro jetting rather than a standard cleaning.
- How far an island drain has to run to meet the existing line.
- Whether new venting is required for the relocated sink.
- Access under the cabinet and how much has to come out first.
Work like this, on real jobs.
More on Instagram
Professional. Punctual. Positive. Prestige. Their name says it all. Raul helped us with a plumbing situation during a bath remodel when the original plumber said it was too complicated. He was available right up to the end of the project.
John
Bath remodel rescue, Google review, 2020
Replaced a water valve in our master bath under the sink and dug up and replaced pvc in my front and back yard where there were huge water leaks.
Jennifer
Valve + yard line repair, Google review, 2020
Jessie and Raul were great to work with as they had to replace the majority of our gas lines in the entire home. They were always on time and great communicators. They did an awesome job of cleaning up my landscaping after having to dig trenches all over.
Chad
Whole home gas line replacement, Google review, 2021
Why homeowners call us for this.
We camera a repeat clog instead of snaking it a third time.
Island relocations get vented properly so the new sink drains right.
Every under sink visit includes a look at the stops and supply lines.
Disposals get matched to your cooking, not to whatever was there before.
Free estimates and written pricing before a single fitting comes loose.
Keep it from happening again.
- Scrape plates into the trash. Grease down the drain always comes back as a clog.
- Run cold water before, during and after using the disposal.
- Skip chemical drain cleaners. They eat pipes as well as clogs.
- Check under the sink monthly for damp spots before they become cabinet damage.
Questions we hear a lot.
Yes. Island sink relocations are a regular part of our remodel work. That covers the new drain run, the venting an island requires and the supply lines to feed it. We work from your plan and rough it in cleanly, so the finished island works like original construction.
A jam or a stuck reset button is worth a repair. A leaking body, repeated trips or a unit past its prime usually means replacement costs less over time. We tell you which one you are looking at and quote both ways when it is close.
Almost always grease and soap, built up over years until the line barely flows. Snaking punches a hole that closes again. When a clog repeats we camera the line and clean it fully, hydro jetting when the buildup is heavy.
Every job starts with a free estimate, from a faucet swap to a full island relocation. You get the price in writing before work begins, and we accept credit cards when it is time to pay.
Yes. We set the supply, the drain and the air gap so the dishwasher never pushes water back into the sink. If the existing angle stop or drain connection is tired, we say so before install day instead of finding it with the old unit already out.
Hydro jetting uses high pressure water to scour grease off the inside wall of the pipe. A cable snake only bores a hole through the blockage. If your kitchen line has clogged more than once in a year, jetting is usually what actually ends it.
Book kitchen plumbing today.
Call (480) 215-0629 any hour, or send photos of the problem and get a straight answer without waiting on a drive out.
Schedule an appointment.
Add photos of the work area and we can usually quote without a first visit.